Skip to main content

Stationary 1D barcode scanner, USB interface, HDWR HD-S30

GTIN: 5907614669850 · SKU: HD-S30

Table of contents​

Specifications​

  • Light source: 650 nm
  • Scanner type: laser
  • Scanning method: automatic (when the code is brought close), manual (when the button is pressed)
  • Interface: USB, Virtual COM
  • Cord length: 150 cm
  • Drop resistance: up to 1.2 meters
  • Operating temperature: −20 to 50 °C
  • Storage temperature: −40 to 70 °C
  • Operating humidity: 5 to 95%
  • Storage humidity: 5 to 95%
  • Device dimensions: 5.5 × 4.5 × 2 cm
  • Package dimensions: 21.5 × 10 × 7.5 cm
  • Device weight: 170 g
  • Weight with packaging: 190 g
  • 1D readable codes: UPC, EAN, ISBN, ISSN, Code 128, Code 39, Code 32, Code 93, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, IATA 2 of 5, MSI Plessey, Code 11, Codabar, GS1 Data Bar, GS1 Composite, Plessey, Febraban

Set contents​

  • Wired code reader
  • Manual

Features​

  • Scanning: automatic (when the code is brought close) or manual (when the button is pressed)
  • Type of barcodes scanned: 1D barcodes from paper labels and from phone screens
  • Interface: USB, Virtual COM
  • Drop resistance: up to 1.2 meters

Configuration codes​

To change scanner settings, scan the barcode below directly with the HD-S30.

💡 Tip: print this page (the "Download this page as PDF" button above) to keep the codes at hand during configuration.

Factory defaults​

Restore all device settings to default values:

Code: Restore factory defaults

Operating mode​

Button (scanning requires pressing the button):

Code: Operating mode — Button

Continuous mode (scanner scans continuously):

Code: Operating mode — Continuous

Auto induction enabled (scanner automatically detects approaching codes):

Code: Operating mode — Auto induction on

Auto induction off:

Code: Operating mode — Auto induction off

Audio settings​

Sound on:

Code: Sound on

Sound off:

Code: Sound off

High volume:

Code: High volume

Medium volume:

Code: Medium volume

Low volume:

Code: Low volume

Interface settings​

USB-HID (keyboard emulation — default):

Code: Interface USB-HID

TTL:

Code: Interface TTL

USB-COM (virtual serial port):

Code: Interface USB-COM

Decoder control​

Enabled reading of all 1D codes:

Code: All 1D codes enabled

Default read type:

Code: Default read type

End mark​

Character added automatically after every scanned code.

CR (Carriage Return):

Code: End mark CR

TAB:

Code: End mark TAB

CR+LF:

Code: End mark CR+LF

No end mark:

Code: No end mark

Uppercase and lowercase letters​

Capital/lowercase replacement (invert case):

Code: Swap case

All lowercase letters:

Code: All lowercase

All uppercase letters:

Code: All uppercase

Do not swap:

Code: Do not swap case

Configure duplicate barcode upload​

Enabled (scanner sends the same code multiple times):

Code: Duplicate barcodes enabled

Disabled:

Code: Duplicate barcodes disabled

General settings — UPCA check digit​

UPCA check digit on:

Code: UPCA check digit on

UPCA check digit off:

Code: UPCA check digit off

General settings — UPCE check digit​

UPCE check digit on:

Code: UPCE check digit on

UPCE check digit off:

Code: UPCE check digit off

General settings — EAN-13 check digit​

EAN-13 check digit on:

Code: EAN-13 check digit on

EAN-13 check digit off:

Code: EAN-13 check digit off

General settings — EAN-8 check digit​

EAN-8 check digit on:

Code: EAN-8 check digit on

EAN-8 check digit off:

Code: EAN-8 check digit off

UPCA → EAN-13 conversion​

UPCA to EAN-13 enabled:

Code: UPCA to EAN-13 on

UPCA to EAN-13 disabled:

Code: UPCA to EAN-13 off

UPCE → UPCA conversion​

UPCE to UPCA enabled:

Code: UPCE to UPCA on

UPCE to UPCA disabled:

Code: UPCE to UPCA off

CODE39​

CODE39 enabled:

Code: CODE39 on

CODE39 disabled:

Code: CODE39 off

GS1​

GS1 enabled:

Code: GS1 on

GS1 disabled:

Code: GS1 off

Frequently asked questions​

Can the HD-S30 read barcodes from a phone screen?
Yes. The advanced optical module allows the scanner to read codes from LCD, LED/OLED displays and mobile device screens, in addition to printed labels.
How drop-resistant is the HD-S30?
The scanner has a metal housing that protects internal components from drops up to 1.2 meters onto a hard surface.
Does the HD-S30 require a driver?
No. In default USB HID mode the scanner is recognized as a keyboard and works immediately upon connection. Virtual COM mode is also available if needed.

Downloads​

Original manufacturer PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.