Skip to main content

Wired stationary 1D / 2D QR & barcode scanner, RS-232, HDWR HD-S63-RS232

GTIN: 5907614666897 · SKU: HD-S63

Table of contents​

Specifications​

  • Sensor: 640 × 480 CMOS
  • Scanning method: automatic (auto-sensing on code presentation)
  • Scan confirmation: sound and light
  • Compatible operating systems: Linux, Android, Windows XP / 7 / 8 / 10, macOS
  • Interface: RS-232
  • Cable length: 170 cm
  • Protection rating: IP54
  • Device dimensions: 10.6 × 7.3 × 14.3 cm
  • Package dimensions: 18 × 16.8 × 12.1 cm
  • Device weight: 370 g
  • Weight with packaging: 528 g
  • Operating temperature: 0 to 60 °C
  • Storage temperature: −20 to 60 °C
  • Operating humidity: 5 to 95%
  • Storage humidity: 5 to 95%
  • Readable 1D codes: EAN-8, EAN-13 (with add-ons), ISBN, UPC-A, UPC-E, Code 39, Code 39 Full ASCII, Code 93, Code 128, Codabar, Industrial 2 of 5, Interleaved 2 of 5, Matrix 2 of 5, GS1-128, GS1 DataBar (RSS14) / Stacked / Limited / Expanded, Standard 25
  • Readable 2D codes: PDF417, Micro PDF417, QR Code, Micro QR, Data Matrix, Aztec, Han Xin

Set contents​

  • Stationary multi-dimensional barcode scanner
  • RS-232 cable
  • User manual

Features​

  • Fast 1D and 2D reading: reads QR codes, Data Matrix and all major 1D barcodes from printed labels and from phone and mobile-device screens
  • Automatic scanning: auto-sensing (presentation) mode reads codes hands-free as soon as they appear in the scanning window
  • RS-232 serial interface: connects to a host serial / COM port with configurable baud rate, parity and stop bits
  • Durable: IP54-rated housing, resistant to dust and splashes
  • Highly configurable: beeper, LED illumination, scan mode, serial parameters, prefix/suffix, code ID, data formatting and full per-symbology settings

Configuration codes​

To change scanner settings, first scan Enter Setup, then the barcode(s) for the option you want, and finally Exit Setup. For parameters with a numeric value (for example a custom prefix or a custom timeout), scan Enter Setup, the option code, the required digit codes from the appendix, then Save, and finally Exit Setup.

💡 Tip: print this page ("Download this page as PDF" button above) to keep the codes at hand during configuration.

Setup mode​

Enter Setup (default):

Code: Enter Setup (default)

Exit Setup:

Code: Exit Setup

User Preference​

Restore Factory Default (default):

Code: Restore Factory Default (default)

Inquiry Firmware Version:

Code: Inquiry Firmware Version

Save User Preference:

Code: Save User Preference

Restore to User Preference Default (default):

Code: Restore to User Preference Default (default)

Reread Timeout​

500ms (default):

Code: 500ms (default)

750ms:

Code: 750ms

1s:

Code: 1s

2s:

Code: 2s

Beeper​

High Volume (default):

Code: High Volume (default)

Low Volume:

Code: Low Volume

On (default):

Code: On (default)

Off:

Code: Off

On (default):

Code: On (default)

Off:

Code: Off

Low Tone (default):

Code: Low Tone (default)

Medium Tone:

Code: Medium Tone

High Tone:

Code: High Tone

Long Duration (default):

Code: Long Duration (default)

LED Illumination​

Short Duration:

Code: Short Duration

Low Tone (default):

Code: Low Tone (default)

Medium Tone:

Code: Medium Tone

High Tone:

Code: High Tone

Normal (default):

Code: Normal (default)

Always on:

Code: Always on

Always off:

Code: Always off

Firmware Upgrade​

On (default):

Code: On (default)

Off:

Code: Off

Firmware Upgrade:

Code: Firmware Upgrade

Sense (automatic) mode​

Sense Mode:

Code: Sense Mode

Short (default):

Code: Short (default)

Medium:

Code: Medium

Long:

Code: Long

Custom Decode Session Timeout:

Code: Custom Decode Session Timeout

Set Custom Decode Session Timeout:

Code: Set Custom Decode Session Timeout

Short:

Code: Short

Medium:

Code: Medium

Long:

Code: Long

Set up Custom Duration:

Code: Set up Custom Duration

Set Custom Good Read Illumination LED Duration:

Code: Set Custom Good Read Illumination LED Duration

Single Trigger Scan​

Continuous Mode:

Code: Continuous Mode

On:

Code: On

Off (default):

Code: Off (default)

Interface settings​

RS-232 serial settings​

Baud Rate 4800:

Code: Baud Rate 4800

Baud Rate 9600:

Code: Baud Rate 9600

Baud Rate 19200:

Code: Baud Rate 19200

Baud Rate 38400:

Code: Baud Rate 38400

Baud Rate 57600:

Code: Baud Rate 57600

Baud Rate 115200:

Code: Baud Rate 115200

Data Bit 8, Stop Bit 1, No Parity (default):

Code: Data Bit 8, Stop Bit 1, No Parity (default)

Data Bit 8, Stop Bit 1, Odd Parity:

Code: Data Bit 8, Stop Bit 1, Odd Parity

Data Bit 8, Stop Bit 1, Even Parity:

Code: Data Bit 8, Stop Bit 1, Even Parity

Data Bit 8, Stop Bit 2, No Parity:

Code: Data Bit 8, Stop Bit 2, No Parity

Data Bit 8, Stop Bit 2, Odd Parity:

Code: Data Bit 8, Stop Bit 2, Odd Parity

Data Bit 8, Stop Bit 2, Even Parity:

Code: Data Bit 8, Stop Bit 2, Even Parity

Data formatting, prefix and suffix​

Custom Prefix​

Enable Custom Prefix:

Code: Enable Custom Prefix

Disable Custom Prefix (default):

Code: Disable Custom Prefix (default)

Restore All Custom Prefix:

Code: Restore All Custom Prefix

Custom Suffix​

Set Custom Prefix:

Code: Set Custom Prefix

Enable Custom Suffix:

Code: Enable Custom Suffix

CODE ID​

Disable Custom Suffix (default):

Code: Disable Custom Suffix (default)

Restore All Custom Suffix:

Code: Restore All Custom Suffix

Set Custom Suffix:

Code: Set Custom Suffix

Enable CODE ID (default):

Code: Enable CODE ID (default)

CODE ID Prefix:

Code: CODE ID Prefix

CODE ID Suffix:

Code: CODE ID Suffix

Restore All CODE ID:

Code: Restore All CODE ID

Set Custom CODE ID:

Code: Set Custom CODE ID

Start Character​

Disable AIM ID (default):

Code: Disable AIM ID (default)

Enable AIM ID Prefix:

Code: Enable AIM ID Prefix

Enable AIM ID Suffix:

Code: Enable AIM ID Suffix

No Start Character (default):

Code: No Start Character (default)

Prefix/Suffix Sequence​

Set Start Character as STX:

Code: Set Start Character as STX

Set Terminating Character Suffix to CR:

Code: Set Terminating Character Suffix to CR

Set Terminating Character Suffix to LF:

Code: Set Terminating Character Suffix to LF

Set Terminating Character Suffix to CRLF:

Code: Set Terminating Character Suffix to CRLF

Set Terminating Character Suffix to LAB:

Code: Set Terminating Character Suffix to LAB

Set Terminating Character Suffix to ETX:

Code: Set Terminating Character Suffix to ETX

Disable Terminating Character Suffix:

Code: Disable Terminating Character Suffix

Convert Case​

Start Character+CODE ID+AIM ID+Custom Prefix (default):

Code: Start Character+CODE ID+AIM ID+Custom Prefix (default)

Start Character+Custom Prefix+CODE ID+AIM ID:

Code: Start Character+Custom Prefix+CODE ID+AIM ID

Custom Suffix+CODE ID+AIM ID+Terminating Character (default):

Code: Custom Suffix+CODE ID+AIM ID+Terminating Character (default)

CODE ID+AIM ID+Custom Suffix+Terminating Character:

Code: CODE ID+AIM ID+Custom Suffix+Terminating Character

No Convert Case (default):

Code: No Convert Case (default)

Convert Case:

Code: Convert Case

Convert All to Lower Case:

Code: Convert All to Lower Case

Convert All to Upper Case:

Code: Convert All to Upper Case

Data Formatter​

Original Data (default):

Code: Original Data (default)

Transmit Start-Field Data:

Code: Transmit Start-Field Data

Transmit Middle Field:

Code: Transmit Middle Field

Transmit End Filed:

Code: Transmit End Filed

Transmit Start Field and End Filed:

Code: Transmit Start Field and End Filed

Set Length Range for Start Field:

Code: Set Length Range for Start Field

Set Length Range for End Field:

Code: Set Length Range for End Field

Symbology settings​

Enable/Disable All 1D Symbologies​

Enable All Symbologies:

Code: Enable All Symbologies

Disable All Symbologies:

Code: Disable All Symbologies

Enable All 1D Symbologies:

Code: Enable All 1D Symbologies

Disable All 1D Symbologies:

Code: Disable All 1D Symbologies

Codabar​

Enable All 2D Symbologies:

Code: Enable All 2D Symbologies

Disable All 2D Symbologies:

Code: Disable All 2D Symbologies

Only Decode Regular BarCodes (default):

Code: Only Decode Regular BarCodes (default)

Decode Regular and Inverse BarCodes Both:

Code: Decode Regular and Inverse BarCodes Both

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable:

Code: Enable

Disable (default):

Code: Disable (default)

Set the Minimum:

Code: Set the Minimum

Set the Maximum Length:

Code: Set the Maximum Length

Code 39​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Disable Check Digit (default):

Code: Disable Check Digit (default)

Enable and do not transmit check digit:

Code: Enable and do not transmit check digit

Enable and transmit check digit:

Code: Enable and transmit check digit

Disable (default):

Code: Disable (default)

Enable:

Code: Enable

Set the Minimum Length(1~127):

Code: Set the Minimum Length(1~127)

Set the Maximum Length:

Code: Set the Maximum Length

Interleaved 2 of 5 (ITF5)​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Disable Check Digit (default):

Code: Disable Check Digit (default)

Enable and do not transmit check digit:

Code: Enable and do not transmit check digit

Enable and Transmit Check Digit:

Code: Enable and Transmit Check Digit

Any Length(4-128 位) (default):

Code: Any Length(4-128 位) (default)

6:

Code: 6

8 Characters:

Code: 8 Characters

10 Characters:

Code: 10 Characters

12 Characters:

Code: 12 Characters

14 Characters:

Code: 14 Characters

16 Characters:

Code: 16 Characters

18 Characters:

Code: 18 Characters

20 Characters:

Code: 20 Characters

22 Characters:

Code: 22 Characters

24 Characters:

Code: 24 Characters

Set Custom Length for ITF5:

Code: Set Custom Length for ITF5

Set the Minimum Length(4~128):

Code: Set the Minimum Length(4~128)

Set the Maximum Length(4~128 ):

Code: Set the Maximum Length(4~128 )

Industrial 2 of 5​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Set the Minimum Length(4~128):

Code: Set the Minimum Length(4~128)

Set the Maximum Length(4~128 ):

Code: Set the Maximum Length(4~128 )

Matrix 2 of 5​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Set the Minimum Length(4~128 ):

Code: Set the Minimum Length(4~128 )

Set the Maximum Length(4~128):

Code: Set the Maximum Length(4~128)

Code 93​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Set the Minimum Length(1~127 ):

Code: Set the Minimum Length(1~127 )

Set the Maximum Length(1~127):

Code: Set the Maximum Length(1~127)

Code 11​

Enable:

Code: Enable

Disable (default):

Code: Disable (default)

Transmit Code 11 Check Digit:

Code: Transmit Code 11 Check Digit

Do not Transmit Code11 Check Digit (default):

Code: Do not Transmit Code11 Check Digit (default)

Disable Check Digit (default):

Code: Disable Check Digit (default)

One Check Digit:

Code: One Check Digit

Two Check Digit:

Code: Two Check Digit

Set the Minimum Length(1~127):

Code: Set the Minimum Length(1~127)

Set the Maximum Length(1~127):

Code: Set the Maximum Length(1~127)

Code 128​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Set the Minimum Length(1~127):

Code: Set the Minimum Length(1~127)

Set the Maximum Length(1~127):

Code: Set the Maximum Length(1~127)

UPC-A​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Transmit UPC-A Check Digit (default):

Code: Transmit UPC-A Check Digit (default)

Do not Transmit UPC-A Check Digit:

Code: Do not Transmit UPC-A Check Digit

Do Not Convert UPC-A to EAN-13 (default):

Code: Do Not Convert UPC-A to EAN-13 (default)

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Transmit Check Digit (default):

Code: Transmit Check Digit (default)

Do not Transmit Check Digit:

Code: Do not Transmit Check Digit

Convert UPC-E to UPC-A:

Code: Convert UPC-E to UPC-A

EAN/JAN-13​

Do not Convert UPC-E to UPC-A (default):

Code: Do not Convert UPC-E to UPC-A (default)

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable and Transmit EAN8 Check Character:

Code: Enable and Transmit EAN8 Check Character

Do not Transmit EAN8 Check Character:

Code: Do not Transmit EAN8 Check Character

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

GS1 DataBar (RSS14)(Stacked)​

Convert ISBN to ISBN:

Code: Convert ISBN to ISBN

Do not Convert ISBN to ISBN (default):

Code: Do not Convert ISBN to ISBN (default)

Convert ISBN to ISSN:

Code: Convert ISBN to ISSN

Do not Convert ISBN to ISBN (default):

Code: Do not Convert ISBN to ISBN (default)

Ignore UPC/EAN/JAN Supplemental (default):

Code: Ignore UPC/EAN/JAN Supplemental (default)

Decode UPC/EAN/JAN Supplemental:

Code: Decode UPC/EAN/JAN Supplemental

Autodiscriminate UPC/EAN/JAN with Supplemental:

Code: Autodiscriminate UPC/EAN/JAN with Supplemental

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

QR​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Enable:

Code: Enable

Disable (default):

Code: Disable (default)

Data Matrix​

On:

Code: On

Off (default):

Code: Off (default)

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

On:

Code: On

Off (default):

Code: Off (default)

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Aztec​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

MSI-Plessey​

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Disable Check Digit:

Code: Disable Check Digit

One Check Digit MOD10 (default):

Code: One Check Digit MOD10 (default)

Two Check Digit MOD10/MOD10:

Code: Two Check Digit MOD10/MOD10

Two Check Digit MOD10/MOD11:

Code: Two Check Digit MOD10/MOD11

Han Xin Code​

Set the Minimum Length(1~127):

Code: Set the Minimum Length(1~127)

Set the Maximum Length(1~127):

Code: Set the Maximum Length(1~127)

Enable (default):

Code: Enable (default)

Disable:

Code: Disable

Appendix: data and digit codes​

These building-block codes are used together with the value-setting options above (custom prefix/suffix, code ID, length ranges). Scan Enter Setup first, then the digits, then Save.

Show data, digit, save and cancel codes

Data and digit codes​

0:

Code: 0

1:

Code: 1

2:

Code: 2

3:

Code: 3

4:

Code: 4

5:

Code: 5

6:

Code: 6

7:

Code: 7

8:

Code: 8

9:

Code: 9

A:

Code: A

B:

Code: B

C:

Code: C

D:

Code: D

E:

Code: E

F:

Code: F

Cancel Last String:

Code: Cancel Last String

Cancel Current Setting:

Code: Cancel Current Setting

Cancel Last Digit:

Code: Cancel Last Digit

Save:

Code: Save

Frequently asked questions​

What types of codes can the HD-S63 scan?
The scanner reads all leading 1D and 2D barcodes, including QR, Data Matrix, and PDF417, both from printed labels and from LCD or mobile device screens.
Does the HD-S63 require additional drivers?
No. The device is plug-and-play and works immediately after connecting the RS232 cable. No additional software is needed.
Is the scanner resistant to dust and moisture?
Yes. The HD-S63 has an IP54 rating, which means it is protected against dust ingress and water splashes from any direction.
How do I enter and exit the HD-S63-RS232 configuration mode?
Scan the "Enter Setup" code, then the codes for the settings you want, and finish with "Exit Setup". Scanning any non-programming barcode also leaves configuration mode.
How do I set the RS-232 baud rate and parity?
Scan "Enter Setup", then the required code from the RS-232 serial settings section (baud rate, and data bit / stop bit / parity), and finally "Exit Setup". Match these to your host serial port. The default is 9600 baud, 8 data bits, 1 stop bit, no parity.

Downloads​

Original manufacturer PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.