Skip to main content

Wired barcode scanner with stand, automatic scanning, USB interface, HDWR HD32A

GTIN: 5907614664350 · SKU: HD32A

Table of contents​

Specifications​

  • Light source: 650 ±20 nm VLD (visible laser diode)
  • Scanning method: manual (push button) / automatic (when the code is brought close)
  • Scan confirmation: light and sound signal
  • Scanning speed: 300 scans per second
  • Interface: USB
  • Drop resistance: up to 1.5 m
  • Device dimensions: 18 × 14.5 × 9.5 cm
  • Package dimensions: 18 × 14.5 × 9.5 cm
  • Device weight: 350 g
  • Weight with packaging: 420 g
  • Operating temperature: −20 to 50 °C
  • Storage temperature: −40 to 70 °C
  • Readable 1D codes: UPC/EAN, ISBN, ISSN, Code 39, Code 39 Full ASCII, Code 32, Code 128, Code 11, Code 93, Codabar, Industrial 2 of 5, Interleaved 2 of 5, MSI, GS1 DataBar

Set contents​

  • HD32A barcode scanner
  • Stand for the scanner
  • USB cable
  • User manual

Features​

  • Scanning: manual (push button) or automatic (when the code is brought close)
  • Type of barcodes scanned: 1D barcodes from paper labels and from LCD / LED / OLED screens of mobile devices
  • Interface: USB — works as USB-HID keyboard (default), Virtual COM port, or TTL/RS232
  • Stand-mounted: the included stand turns the HD32A into a hands-free scanning station for automatic scanning
  • Durable: drop resistance up to 1.5 m

Configuration codes​

To change scanner settings, scan the barcode below directly with the HD32A.

💡 Tip: print this page ("Download this page as PDF" button above) to keep the codes at hand during configuration.

Restore factory defaults​

Restore all device settings to default values (interface USB-HID, trigger button, end mark CR):

Code: Restore factory defaults

Scan mode​

Manual — on the button (default — press the button to scan):

Code: Scan mode — Manual (button)

Continuous (the scanner reads continuously):

Code: Scan mode — Continuous

Automatic mode on (sensor-driven scanning when a code is brought close):

Code: Automatic mode on

Automatic mode off:

Code: Automatic mode off

The automatic (auto-induction) mode can also be toggled by holding the scan button for about 6 seconds.

Buzzer​

Beep on (default):

Code: Beep on

Beep off:

Code: Beep off

High volume (default):

Code: Beep volume high

Medium volume:

Code: Beep volume medium

Low volume:

Code: Beep volume low

Interface​

USB-HID (default — the scanner behaves like a USB keyboard):

Code: Interface USB-HID

Virtual COM (USB serial port):

Code: Interface Virtual COM

TTL / RS232:

Code: Interface TTL RS232

Decoded symbologies scope​

Read the default symbologies (default):

Code: Read default symbologies

Read all symbologies:

Code: Read all symbologies

End mark​

Character automatically appended after each scanned code.

CR (Carriage Return, default):

Code: End mark CR

CR + LF:

Code: End mark CR+LF

TAB:

Code: End mark TAB

No end mark:

Code: No end mark

Capital and lowercase​

No case conversion (default):

Code: No case conversion

Swap capital ↔ lowercase:

Code: Swap capital and lowercase

All lowercase:

Code: All lowercase

All uppercase:

Code: All uppercase

Duplicate barcode upload​

Duplicate detection off (default — the same barcode can be uploaded repeatedly):

Code: Duplicate detection off

Duplicate detection on (the same barcode cannot be uploaded twice in a row):

Code: Duplicate detection on

Barcode-type ID prefix​

When enabled, the scanner prepends a single letter identifying the symbology (e.g. a = Code 39, b = UPC-A, g = Code 128).

Send ID off (default):

Code: Send barcode ID off

Send ID on:

Code: Send barcode ID on

UPC / EAN​

UPC-A check digit on (default):

Code: UPC-A check digit on

UPC-A check digit off:

Code: UPC-A check digit off

UPC-E check digit on (default):

Code: UPC-E check digit on

UPC-E check digit off:

Code: UPC-E check digit off

EAN-13 check digit on (default):

Code: EAN-13 check digit on

EAN-13 check digit off:

Code: EAN-13 check digit off

EAN-8 check digit on (default):

Code: EAN-8 check digit on

EAN-8 check digit off:

Code: EAN-8 check digit off

UPC-A → EAN-13 conversion on:

Code: UPC-A to EAN-13 on

UPC-A → EAN-13 conversion off (default):

Code: UPC-A to EAN-13 off

UPC-E → UPC-A conversion on:

Code: UPC-E to UPC-A on

UPC-E → UPC-A conversion off (default):

Code: UPC-E to UPC-A off

Supplemental (extra) code off (default):

Code: UPC EAN extra code off

Read 2 or 5-digit supplemental code:

Code: UPC EAN 2 or 5 digit extra code

Require 2 or 5-digit supplemental code:

Code: UPC EAN must have extra code

Code 39​

Full ASCII off (default):

Code: Code 39 Full ASCII off

Full ASCII on:

Code: Code 39 Full ASCII on

GS1 DataBar​

GS1 DataBar on:

Code: GS1 DataBar on

GS1 DataBar off (default):

Code: GS1 DataBar off

Frequently asked questions​

Does the HD32A include a cradle?
Yes. The set includes a cradle that holds the scanner in the optimal position for hands-free automatic scanning.
Can the scanner work without the cradle?
Yes. The HD32A can be used handheld with manual button-press scanning, or placed in the cradle for automatic mode.
Does the scanner require driver installation?
No. The HD32A uses USB Plug & Play — simply connect it to your computer or POS terminal and it is ready to scan.

Downloads​

Original manufacturer PDF manuals and data sheets. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.