Skip to main content

Stationary 1D / 2D QR & barcode presentation scanner, RS-232, HDWR HD340-RS232

GTIN: 5907614664503 · SKU: HD340

Table of contents​

Specifications​

  • Colour: black
  • Material: ABS
  • Light source: LED
  • Sensor: CMOS
  • Resolution: 644 × 488 px
  • Scanning method: automatic (auto-sensing on code presentation)
  • Scan confirmation: beep
  • Scan speed: 200 scans/second
  • Scanning angle: 360°
  • Power supply: 5 V
  • Interface: RS-232 (TTL serial)
  • Drop resistance: up to 1.6 m
  • Device dimensions: 8 × 6.8 × 5.3 cm
  • Package dimensions: 17 × 9 × 6 cm
  • Device weight: 135 g
  • Weight with packaging: 170 g
  • Readable 1D codes: EAN-13, EAN-8, UPC-A, UPC-E, Code 128, Code 39, Code 93, Codabar, Interleaved 2 of 5, Industrial 25, Matrix 2 of 5, Code 11, MSI Plessey, GS1 DataBar (RSS-14 / Limited / Expanded)
  • Readable 2D codes: QR Code, Micro QR, Data Matrix, PDF417

Set contents​

  • Stationary multi-dimensional barcode scanner
  • RS-232 cable
  • User manual

Features​

  • Fast 1D and 2D reading: reads QR codes, Data Matrix, PDF417 and all major 1D barcodes, including from phone and mobile-device screens
  • Presentation scanning: auto-sensing mode reads codes hands-free as soon as they are placed in front of the scanner
  • 360° scan angle, 200 scans/s: fast omnidirectional reading for busy counters
  • RS-232 serial interface: connects to a host serial / COM port; configurable baud rate, parity and stop bits
  • Highly configurable: RS-232 serial parameters, scan modes, illumination, beeper, prefix/suffix, code ID and full per-symbology settings

Configuration codes​

To change scanner settings, first scan Enter Setup, then the barcode(s) for the option you want, and finally Exit Setup. For parameters with a numeric value, scan Enter Setup, the option code, the required digit codes from the appendix, and finally Exit Setup.

💡 Tip: print this page ("Download this page as PDF" button above) to keep the codes at hand during configuration.

Setup mode​

Entering Setup Mode:

Code: Entering Setup Mode

Exiting Setup Mode:

Code: Exiting Setup Mode

Use of Programming Barcode​

Do Not Transmit Programming Barcode Data  (default):

Code: Do Not Transmit Programming Barcode Data  (default)

Transmit Programming Barcode Data :

Code: Transmit Programming Barcode Data 

User Default Settings​

Restoring settings Factory:

Code: Restoring settings Factory

Save the current configuration as Default settings:

Code: Save the current configuration as Default settings

Restore default:

Code: Restore default

Communication interface settings​

Output Mode of Communication Port​

TTL:

Code: TTL

Baud Rate​

HID & TTL Simultaneous Mode:

Code: HID & TTL Simultaneous Mode

Parity Methods​

115200bps:

Code: 115200bps

57600bps:

Code: 57600bps

38400bps:

Code: 38400bps

19200bps:

Code: 19200bps

14400bps:

Code: 14400bps

9600bps (default):

Code: 9600bps (default)

4800bps:

Code: 4800bps

1200bps:

Code: 1200bps

Parity​

None (default):

Code: None (default)

ODD Parity:

Code: ODD Parity

Even Parity:

Code: Even Parity

Scan mode settings​

Decode Session Timeout​

Manual Mode:

Code: Manual Mode

Level Trigger (default):

Code: Level Trigger (default)

Edge Trigger:

Code: Edge Trigger

Command Trigger Mode​

Command Trigger Mode :

Code: Command Trigger Mode 

Infinite:

Code: Infinite

1000ms:

Code: 1000ms

3000ms:

Code: 3000ms

5000ms (default):

Code: 5000ms (default)

10000ms:

Code: 10000ms

Timeout Between Decodes​

Continuous mode:

Code: Continuous mode

Trigger command response disable:

Code: Trigger command response disable

Trigger command response allowed (default):

Code: Trigger command response allowed (default)

Timeout between Decodes (Same Barcode)​

No delay:

Code: No delay

500ms:

Code: 500ms

1000ms (Default):

Code: 1000ms (Default)

3000 ms:

Code: 3000 ms

500 ms Setting the delay time for scanning a repeating:

Code: 500 ms Setting the delay time for scanning a repeating

Delay Off (Default):

Code: Delay Off (Default)

Delay Enabled:

Code: Delay Enabled

Continuous mode key pause switch​

Delay on all the time:

Code: Delay on all the time

500ms:

Code: 500ms

1000ms:

Code: 1000ms

3000ms:

Code: 3000ms

5000ms:

Code: 5000ms

Continuous mode key pause is not:

Code: Continuous mode key pause is not

Continuous mode key pause (default):

Code: Continuous mode key pause (default)

Sensitivity​

Auto mode Time delay between barcode scans:

Code: Auto mode Time delay between barcode scans

Image Stabilization Timeout​

0ms (default):

Code: 0ms (default)

100ms:

Code: 100ms

400ms:

Code: 400ms

1000ms:

Code: 1000ms

2000ms:

Code: 2000ms

Enhanced Sensitivity:

Code: Enhanced Sensitivity

High Sensitivity:

Code: High Sensitivity

Low Sensitivity:

Code: Low Sensitivity

Medium Sensitivity (default):

Code: Medium Sensitivity (default)

Illumination and aiming​

Positioning​

Backlight on during scan:

Code: Backlight on during scan

Backlight on All the time:

Code: Backlight on All the time

Backlight Disabled:

Code: Backlight Disabled

Positioning Light (default):

Code: Positioning Light (default)

Enabled:

Code: Enabled

Disabled:

Code: Disabled

Positioning Light (default):

Code: Positioning Light (default)

Beeper, LED and keyboard output​

Active Buzze​

Mute Enabled:

Code: Mute Enabled

Mute off (Default):

Code: Mute off (Default)

Passive_Low Frequency:

Code: Passive_Low Frequency

Passive_Intermediate Frequency (default):

Code: Passive_Intermediate Frequency (default)

Passive_High Frequency:

Code: Passive_High Frequency

Passive Buzzer (default):

Code: Passive Buzzer (default)

Good Read Beep for Programming Barcode​

Loud beep (Default):

Code: Loud beep (Default)

Silent signal Sound:

Code: Silent signal Sound

Active Buzzer:

Code: Active Buzzer

Beep for Programming Barcode_ON (default):

Code: Beep for Programming Barcode_ON (default)

Beep for Programming Barcode _OFF:

Code: Beep for Programming Barcode _OFF

Beep during Startup enabled (default):

Code: Beep during Startup enabled (default)

Beep during Startup Disabled:

Code: Beep during Startup Disabled

Good Read LED/Beep​

LED during scanning enabled (default):

Code: LED during scanning enabled (default)

LED during scanning disabled:

Code: LED during scanning disabled

Sound during scanning enabled:

Code: Sound during scanning enabled

Sound:

Code: Sound

30ms:

Code: 30ms

60ms (default):

Code: 60ms (default)

90ms:

Code: 90ms

120ms:

Code: 120ms

Reverse Scanning Module​

Image Mirror Flip _ ON:

Code: Image Mirror Flip _ ON

Image Mirror Flip_ OFF (default):

Code: Image Mirror Flip_ OFF (default)

Disabled (default):

Code: Disabled (default)

Enabled Setting Prefix and Suffix:

Code: Enabled Setting Prefix and Suffix

Read Device Version Information​

Read device version information:

Code: Read device version information

Read all device version information:

Code: Read all device version information

Invoicing Mode Enable After the invoice mode is opened (default):

Code: Invoicing Mode Enable After the invoice mode is opened (default)

Invoicing Mode Disable After the invoice mode is opened:

Code: Invoicing Mode Disable After the invoice mode is opened

Local Invoicing Mode It should be noted that (default):

Code: Local Invoicing Mode It should be noted that (default)

Online Invoicing Mode It should be noted that:

Code: Online Invoicing Mode It should be noted that

Read Chip SN​

Read Device ID:

Code: Read Device ID

Read chip SN number:

Code: Read chip SN number

Prefix, suffix and data formatting​

Prefix​

Prefix Enabled:

Code: Prefix Enabled

Prefix disabled (default):

Code: Prefix disabled (default)

Setting Prefix:

Code: Setting Prefix

Custom Code ID​

Suffix On:

Code: Suffix On

Suffix disabled (default):

Code: Suffix disabled (default)

Setting Suffix:

Code: Setting Suffix

Enable Code ID:

Code: Enable Code ID

Disable Code ID (default):

Code: Disable Code ID (default)

Modify Code ID​

Restore Default Code ID:

Code: Restore Default Code ID

Modify EAN13 Code ID:

Code: Modify EAN13 Code ID

Modify EAN8 Code ID:

Code: Modify EAN8 Code ID

Modify UPC:

Code: Modify UPC

Modify UPC:

Code: Modify UPC

Modify UPC:

Code: Modify UPC

Modify Code 128 Code ID:

Code: Modify Code 128 Code ID

Modify Code 39 Code ID:

Code: Modify Code 39 Code ID

Modify Code 93 Code ID:

Code: Modify Code 93 Code ID

Modify Codabar Code ID:

Code: Modify Codabar Code ID

Modify Interleaved 2 of 5 Code ID:

Code: Modify Interleaved 2 of 5 Code ID

Modify Industrial 25 Code ID:

Code: Modify Industrial 25 Code ID

Modify Matrix 2 of 5 Code ID:

Code: Modify Matrix 2 of 5 Code ID

Modify Code11 Code ID:

Code: Modify Code11 Code ID

Modify MSI Code ID:

Code: Modify MSI Code ID

Modify RSS Code ID:

Code: Modify RSS Code ID

Modify RSS:

Code: Modify RSS

Tail​

Modify RSS:

Code: Modify RSS

Modify QR Code Code ID:

Code: Modify QR Code Code ID

Modify Data Matrix Code ID:

Code: Modify Data Matrix Code ID

Modify PDF417 Code ID:

Code: Modify PDF417 Code ID

Modify Mico QR Code ID:

Code: Modify Mico QR Code ID

Modify Chinese Sensible(HanXin) Code ID:

Code: Modify Chinese Sensible(HanXin) Code ID

Trails Off:

Code: Trails Off

CR (default):

Code: CR (default)

TAB:

Code: TAB

CRLF Save and cancel settings:

Code: CRLF Save and cancel settings

Modify the Length for Data​

Transmit all Data (default):

Code: Transmit all Data (default)

Tansmit the Start Data:

Code: Tansmit the Start Data

Tansmit the END Data:

Code: Tansmit the END Data

Tansmit the Center Data:

Code: Tansmit the Center Data

Modify the Length for Start Data:

Code: Modify the Length for Start Data

Modify the Length for End Data:

Code: Modify the Length for End Data

Output Protocol​

Enable Transmitting RF Information:

Code: Enable Transmitting RF Information

Disable Transmitting RF Information (default):

Code: Disable Transmitting RF Information (default)

Modify RF Information :

Code: Modify RF Information 

GS Character Replacement​

Raw Data (default):

Code: Raw Data (default)

With Protocol:

Code: With Protocol

GS Character Replacement Enable:

Code: GS Character Replacement Enable

GS Character Replacement Disable (default):

Code: GS Character Replacement Disable (default)

GS Alternate Character Modification:

Code: GS Alternate Character Modification

Web address code recognition​

Enable Reading Of Web Address Codes (default):

Code: Enable Reading Of Web Address Codes (default)

DisablerReading Of Web Address Codes:

Code: DisablerReading Of Web Address Codes

Quick operation​

Serial Port & Full Codes On Mode​

Fast POS Mode:

Code: Fast POS Mode

Serial Port & Full Codes ON:

Code: Serial Port & Full Codes ON

Symbology settings​

Enhancement of literacy​

Enable Transmit Check Digit (default):

Code: Enable Transmit Check Digit (default)

Disable Transmit Check Digit:

Code: Disable Transmit Check Digit

Enable All Symbologies:

Code: Enable All Symbologies

Disable All Symbologies:

Code: Disable All Symbologies

Enable Default Symbologies (default):

Code: Enable Default Symbologies (default)

EAN 13​

Enhancement of literacy enable:

Code: Enhancement of literacy enable

Enhancement of literacy prohibits (default):

Code: Enhancement of literacy prohibits (default)

Enable EAN13 (default):

Code: Enable EAN13 (default)

Disable EAN13:

Code: Disable EAN13

EAN13 Add:

Code: EAN13 Add

EAN13 Add (default):

Code: EAN13 Add (default)

EAN 8​

Enable EAN13:

Code: Enable EAN13

Disable EAN13 (default):

Code: Disable EAN13 (default)

Enable EAN13:

Code: Enable EAN13

Disable EAN13 (default):

Code: Disable EAN13 (default)

Enable Transmission ofEAN13 Parity Bits (default):

Code: Enable Transmission ofEAN13 Parity Bits (default)

Disable Transmission of EAN13 Parity Bits:

Code: Disable Transmission of EAN13 Parity Bits

Enable EAN8 (default):

Code: Enable EAN8 (default)

Disable EAN8:

Code: Disable EAN8

UPC-A​

EAN8 Add:

Code: EAN8 Add

EAN8 Add (default):

Code: EAN8 Add (default)

Enable EAN8:

Code: Enable EAN8

Disable EAN8 (default):

Code: Disable EAN8 (default)

Enable EAN8:

Code: Enable EAN8

Disable EAN8 (default):

Code: Disable EAN8 (default)

Enable Transmission ofEAN8Parity Bits (default):

Code: Enable Transmission ofEAN8Parity Bits (default)

Disable Transmission of EAN8Parity Bits:

Code: Disable Transmission of EAN8Parity Bits

Enable UPC (default):

Code: Enable UPC (default)

Disable UPC:

Code: Disable UPC

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

UPC:

Code: UPC

UPC (default):

Code: UPC (default)

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

UPC-E0​

Enable Transmission of UPCAParity Bits (default):

Code: Enable Transmission of UPCAParity Bits (default)

Disable Transmission of UPCAParity Bits:

Code: Disable Transmission of UPCAParity Bits

Enable UPC (default):

Code: Enable UPC (default)

Disable UPC:

Code: Disable UPC

UPC:

Code: UPC

UPC (default):

Code: UPC (default)

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

UPC-E1​

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

Enable Transmission of UPC (default):

Code: Enable Transmission of UPC (default)

Disable Transmission of UPC:

Code: Disable Transmission of UPC

Enable UPC (default):

Code: Enable UPC (default)

Disable UPC:

Code: Disable UPC

UPC:

Code: UPC

UPC (default):

Code: UPC (default)

Code128​

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

Enable UPC:

Code: Enable UPC

Disable UPC (default):

Code: Disable UPC (default)

Enable Transmission of UPC (default):

Code: Enable Transmission of UPC (default)

Disable Transmission of UPC:

Code: Disable Transmission of UPC

Enable Code128 (default):

Code: Enable Code128 (default)

Disable Code128:

Code: Disable Code128

Set the Minimum Length for Code128 to 0 (default):

Code: Set the Minimum Length for Code128 to 0 (default)

Set the Minimum Length for Code128 to 4:

Code: Set the Minimum Length for Code128 to 4

Code39​

Set the Maximum Length for Code128 to 32:

Code: Set the Maximum Length for Code128 to 32

Set the Maximum Length for Code128 to 255 (default):

Code: Set the Maximum Length for Code128 to 255 (default)

Code128 Prefix (11):

Code: Code128 Prefix (11)

Code128 Prefix (11) (default):

Code: Code128 Prefix (11) (default)

Enable Code39 (default):

Code: Enable Code39 (default)

Disable Code39:

Code: Disable Code39

Set the Minimum Length for Code39 to 0 (default):

Code: Set the Minimum Length for Code39 to 0 (default)

Set the Minimum Length for Code39 to 4:

Code: Set the Minimum Length for Code39 to 4

Set the Maximum Length for Code39 to 32:

Code: Set the Maximum Length for Code39 to 32

Set the Maximum Length for Code39 to 255 (default):

Code: Set the Maximum Length for Code39 to 255 (default)

Output of Code39 Start Character:

Code: Output of Code39 Start Character

Disable (default):

Code: Disable (default)

Output of Code39 Stop Character:

Code: Output of Code39 Stop Character

Disable (default):

Code: Disable (default)

Support Code32 Mode:

Code: Support Code32 Mode

Disable (default):

Code: Disable (default)

the (default):

Code: the (default)

Disable:

Code: Disable

Code93​

Support FullAsc Mode:

Code: Support FullAsc Mode

Disable (default):

Code: Disable (default)

Code 39 Handles Verification:

Code: Code 39 Handles Verification

Code 39 Does Not Handle Verification (default):

Code: Code 39 Does Not Handle Verification (default)

Code39:

Code: Code39

Code39 Does Not (default):

Code: Code39 Does Not (default)

Enable Code93 (default):

Code: Enable Code93 (default)

Disable Code93:

Code: Disable Code93

CodaBar​

Set the Minimum Length for Code93 to 0 (default):

Code: Set the Minimum Length for Code93 to 0 (default)

Set the Minimum Length for Code93 to 4:

Code: Set the Minimum Length for Code93 to 4

Set the Maximum Length for Code93 to 32:

Code: Set the Maximum Length for Code93 to 32

Set the Maximum Length for Code93 to 255 (default):

Code: Set the Maximum Length for Code93 to 255 (default)

Enable CodaBar (default):

Code: Enable CodaBar (default)

Disable CodaBar:

Code: Disable CodaBar

Set the Minimum Length for CodaBar to 0 (default):

Code: Set the Minimum Length for CodaBar to 0 (default)

Set the Minimum Length for CodaBar to 4:

Code: Set the Minimum Length for CodaBar to 4

Set the Maximum Length for CodaBar to 32:

Code: Set the Maximum Length for CodaBar to 32

Set the Maximum Length for CodaBar to 255 (default):

Code: Set the Maximum Length for CodaBar to 255 (default)

Output of CodaBar Start/Stop Character:

Code: Output of CodaBar Start/Stop Character

Disable (default):

Code: Disable (default)

CodaBar Do Not Process Verification (default):

Code: CodaBar Do Not Process Verification (default)

CodaBar Mod10 Check:

Code: CodaBar Mod10 Check

CodaBar Mod16 Check:

Code: CodaBar Mod16 Check

CodaBar Double Check:

Code: CodaBar Double Check

CodaBar Parity Bit:

Code: CodaBar Parity Bit

CodaBar Parity Bit Not (default):

Code: CodaBar Parity Bit Not (default)

Interleaved 2 of 5​

Enable Interleaved 2 of 5:

Code: Enable Interleaved 2 of 5

Disable Interleaved 2 of 5 (default):

Code: Disable Interleaved 2 of 5 (default)

Set the Minimum Length to 0:

Code: Set the Minimum Length to 0

Set the Minimum Length to 4 (default):

Code: Set the Minimum Length to 4 (default)

Set the Maximum Length to 32 (default):

Code: Set the Maximum Length to 32 (default)

Set the Maximum Length to 255:

Code: Set the Maximum Length to 255

Interleaved 2 of 5 Verification Format Mod10:

Code: Interleaved 2 of 5 Verification Format Mod10

Interleaved 2 of 5 Verification Format NONE (default):

Code: Interleaved 2 of 5 Verification Format NONE (default)

Industrial 25​

Interleaved 2 of 5:

Code: Interleaved 2 of 5

Interleaved 2 of 5 Does Not (default):

Code: Interleaved 2 of 5 Does Not (default)

Enable Industrial 25:

Code: Enable Industrial 25

Disable Industrial 25 (default):

Code: Disable Industrial 25 (default)

Set the Minimum Length to 0:

Code: Set the Minimum Length to 0

Set the Minimum Length to 4 (default):

Code: Set the Minimum Length to 4 (default)

Set the Maximum Length to 32 (default):

Code: Set the Maximum Length to 32 (default)

Set the Maximum Length to 255:

Code: Set the Maximum Length to 255

Matrix 2 of 5​

Industrial 25 Verification Format Mod10:

Code: Industrial 25 Verification Format Mod10

Industrial 25 Verification Format NONE (default):

Code: Industrial 25 Verification Format NONE (default)

Industrial 25:

Code: Industrial 25

Industrial 25 Does Not (default):

Code: Industrial 25 Does Not (default)

Enable Matrix 2 of 5:

Code: Enable Matrix 2 of 5

Disable Matrix 2 of 5 (default):

Code: Disable Matrix 2 of 5 (default)

Set the Minimum Length to 0:

Code: Set the Minimum Length to 0

Set the Minimum Length to 4 (default):

Code: Set the Minimum Length to 4 (default)

Code11​

Set the Maximum Length to 32 (default):

Code: Set the Maximum Length to 32 (default)

Set the Maximum Length to 255:

Code: Set the Maximum Length to 255

Enable Code11:

Code: Enable Code11

Disable Code11 (default):

Code: Disable Code11 (default)

MSI Plessey​

Set the Minimum Length for Code11 to 0:

Code: Set the Minimum Length for Code11 to 0

Set the Minimum Length for Code11 to 4 (default):

Code: Set the Minimum Length for Code11 to 4 (default)

Set the Maximum Length for Code11 to 32 (default):

Code: Set the Maximum Length for Code11 to 32 (default)

Set the Maximum Length for Code11 to 255:

Code: Set the Maximum Length for Code11 to 255

Check Code11 (default):

Code: Check Code11 (default)

Check Code11:

Code: Check Code11

Code11:

Code: Code11

Code11 Does Not (default):

Code: Code11 Does Not (default)

Enable MSI Plessey:

Code: Enable MSI Plessey

Disable MSI Plessey (default):

Code: Disable MSI Plessey (default)

RSS-14​

Single Mod10:

Code: Single Mod10

Double Mod10 (default):

Code: Double Mod10 (default)

MSI PlesseyOutputs Parity Bits:

Code: MSI PlesseyOutputs Parity Bits

MSI Plessey Does Not (default):

Code: MSI Plessey Does Not (default)

Set the Minimum Length for MSI Plessey to 0:

Code: Set the Minimum Length for MSI Plessey to 0

Set the Minimum Length for MSI Plesseyto 4 (default):

Code: Set the Minimum Length for MSI Plesseyto 4 (default)

Set the Maximum Length for MSI Plessey to 32 (default):

Code: Set the Maximum Length for MSI Plessey to 32 (default)

Set the Maximum Length for MSI Plessey to 255:

Code: Set the Maximum Length for MSI Plessey to 255

RSS-Limited​

Enable RSS:

Code: Enable RSS

Disable RSS (default):

Code: Disable RSS (default)

Enable RSS:

Code: Enable RSS

Disable RSS (default):

Code: Disable RSS (default)

RSS:

Code: RSS

RSS (default):

Code: RSS (default)

RSS:

Code: RSS

RSS (default):

Code: RSS (default)

RSS-Expanded​

Enable RSS:

Code: Enable RSS

Disable RSS (default):

Code: Disable RSS (default)

Set the Minimum Length to 0:

Code: Set the Minimum Length to 0

Set the Minimum Length to 4 (default):

Code: Set the Minimum Length to 4 (default)

Set the Maximum Length to 32 (default):

Code: Set the Maximum Length to 32 (default)

Set the Maximum Length to 255:

Code: Set the Maximum Length to 255

RSS:

Code: RSS

RSS (default):

Code: RSS (default)

QR Code​

Enable QR (default):

Code: Enable QR (default)

Disable QR:

Code: Disable QR

Enable QR Mode1:

Code: Enable QR Mode1

Disable QR Mode1 (default):

Code: Disable QR Mode1 (default)

QR Prefix (11):

Code: QR Prefix (11)

QR Prefix (11) (default):

Code: QR Prefix (11) (default)

Mico QR​

Enable DM (default):

Code: Enable DM (default)

Disable DM:

Code: Disable DM

Enable Multiple DM:

Code: Enable Multiple DM

Disable Multiple DM (default):

Code: Disable Multiple DM (default)

Enable PDF417 (default):

Code: Enable PDF417 (default)

Disable PDF417:

Code: Disable PDF417

Enable Mico QR (default):

Code: Enable Mico QR (default)

Disable Mico QR:

Code: Disable Mico QR

Chinese Sensible(HanXin) Code​

EnableChinese Sensible(HanXin) Code:

Code: EnableChinese Sensible(HanXin) Code

DisableChinese Sensible(HanXin) Code (default):

Code: DisableChinese Sensible(HanXin) Code (default)

Appendix: save, cancel and digit codes​

These building-block codes (save / cancel and numeric digits) are used together with the value-setting options above.

Show save, cancel and digit codes

Cancel​

Save:

Code: Save

Cancel the last digit:

Code: Cancel the last digit

Canceling the entire string of digits:

Code: Canceling the entire string of digits

Canceling current settings:

Code: Canceling current settings

～ 9​

0:

Code: 0

1:

Code: 1

2:

Code: 2

3:

Code: 3

4:

Code: 4

5:

Code: 5

6:

Code: 6

7:

Code: 7

A ～F​

8:

Code: 8

9:

Code: 9

A:

Code: A

B:

Code: B

C:

Code: C

D:

Code: D

E:

Code: E

F:

Code: F

Frequently asked questions​

How do I enter and exit the HD340-RS232 configuration mode?
Scan the "Enter Setup" code, then the codes for the settings you want, and finish with "Exit Setup".
How do I set the RS-232 baud rate and parity?
Scan "Enter Setup", then the required code from the communication interface section (baud rate, parity), and finally "Exit Setup". Match these to your host serial port; the default is 9600 bps.
Does the HD340-RS232 read codes from phone and computer screens?
Yes. The CMOS sensor reads 1D and 2D codes, including QR codes, from printed labels as well as from LCD and mobile-device screens.
How does the automatic (presentation) scanning work?
Placed on a counter, the HD340-RS232 senses a code brought in front of it and reads it automatically without pressing a button — ideal for point-of-sale use.

Downloads​

Original manufacturer PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.