Skip to main content

Wired 1D / 2D QR barcode scanner, USB and RS232, HDWR HD630

GTIN: 5907614664329 · SKU: HD630

Table of contents​

Specifications​

  • Light source: 617 nm LED
  • Sensor: CMOS
  • Scanning method: manual (push button)
  • Scan confirmation: light and sound
  • Scanning speed: 300 scans per second
  • Interface: USB (with RS232 configuration support)
  • Drop resistance: up to 1.8 m
  • Device dimensions: 18 × 10 × 8 cm
  • Package dimensions: 18 × 10 × 8 cm
  • Device weight: 215 g
  • Weight with packaging: 275 g
  • Operating temperature: −20 to 50 °C
  • Storage temperature: −40 to 70 °C
  • Readable 1D codes: UPC/EAN, ISBN, ISSN, Code 39, Code 39 Full ASCII, Code 32, Code 128, Code 11, Code 93, Codabar, Industrial 2 of 5, Interleaved 2 of 5, MSI, GS1 DataBar
  • Readable 2D codes: QR, Micro QR, Data Matrix, PDF417, MicroPDF417, Aztec Code, MaxiCode, Hanxin

Set contents​

  • Wired HD630 2D barcode scanner
  • USB cable
  • User manual (downloadable from the product page)

Features​

  • 1D and 2D scanning: reads QR codes and 1D barcodes quickly and precisely, both from printed labels and from phone and mobile-device screens
  • Fast manual reading: up to 300 scans per second
  • Plug and play: connects over USB as a standard HID keyboard — recognised automatically by Windows, macOS and Linux with no drivers
  • RS232 support: configurable serial interface (baud rate, data bits, parity)
  • Highly configurable: keyboard layout (25 languages), prefix/suffix, code ID, data formatting and full per-symbology settings
  • Ergonomic and light: comfortable shape for everyday use

Configuration codes​

To change scanner settings, scan the barcode below directly with the HD630.

💡 Tip: print this page ("Download this page as PDF" button above) to keep the codes at hand during configuration.

General​

Enable Parameter Barcode Scanning(default):

Code: Enable Parameter Barcode Scanning(default)

Disable Parameter Barcode Scanning:

Code: Disable Parameter Barcode Scanning

Send firmware Version:

Code: Send firmware Version

Restore to Factory Default:

Code: Restore to Factory Default

User Preference​

Save User Preference Configuration:

Code: Save User Preference Configuration

Restore to User Preference:

Code: Restore to User Preference

ASCII Control Character​

Enable Control Character:

Code: Enable Control Character

Disable Control Character(default):

Code: Disable Control Character(default)

Barcode contains CR and LF(USB Keyboard)​

Output Enter Key only when barcode contains 0D(default):

Code: Output Enter Key only when barcode contains 0D(default)

Output Enter Key when barcode only contains 0A:

Code: Output Enter Key when barcode only contains 0A

Output Enter Key when barcode contains 0A or 0D both:

Code: Output Enter Key when barcode contains 0A or 0D both

USB Keyboard- Transmission Speed​

Speed Low(default):

Code: Speed Low(default)

Speed Medium:

Code: Speed Medium

Speed High:

Code: Speed High

Set Custom Speed(2ms~50ms):

Code: Set Custom Speed(2ms~50ms)

USB Keyboard - Convert Case​

Not Converted Case(default):

Code: Not Converted Case(default)

Convert the case:

Code: Convert the case

Convert All to Upper Letter:

Code: Convert All to Upper Letter

Convert All to Lower Letter:

Code: Convert All to Lower Letter

Virtual keyboard​

Disable Virutal Keyboard(default):

Code: Disable Virutal Keyboard(default)

Virtual Keyboard(模式一):

Code: Virtual Keyboard(模式一)

Virtual Keyboard(Mode2):

Code: Virtual Keyboard(Mode2)

Virtual Keyboard(Mode3):

Code: Virtual Keyboard(Mode3)

Operating System - Virtual Keyboard​

WINDOWS(default):

Code: WINDOWS(default)

MAC OS:

Code: MAC OS

LINUX:

Code: LINUX

Country Code​

English/Latin-1(default):

Code: English/Latin-1(default)

GBK(Notepad/excel):

Code: GBK(Notepad/excel)

UNICODE(Word):

Code: UNICODE(Word)

RS232 baud rate​

Baud Rate 4800:

Code: Baud Rate 4800

Baud Rate 9600(default):

Code: Baud Rate 9600(default)

Baud Rate 19200:

Code: Baud Rate 19200

Baud Rate 38400:

Code: Baud Rate 38400

Baud Rate 57600:

Code: Baud Rate 57600

Baud Rate 115200:

Code: Baud Rate 115200

RS232 data bits / stop bits / parity​

Data Bits，1 Stop Bit，No Parity:

Code: Data Bits，1 Stop Bit，No Parity

Data Bits，1 Stop Bit，Even Parity:

Code: Data Bits，1 Stop Bit，Even Parity

Data Bit，1 Stop Bit，Odd Parity:

Code: Data Bit，1 Stop Bit，Odd Parity

Data Bit，2 Stop Bit，No Parity:

Code: Data Bit，2 Stop Bit，No Parity

Data Bit，2 Stop Bit，Even Parity:

Code: Data Bit，2 Stop Bit，Even Parity

Data Bit，2 Stop Bit，Odd Parity:

Code: Data Bit，2 Stop Bit，Odd Parity

Data Bit，1 Stop Bit，No Parity(default):

Code: Data Bit，1 Stop Bit，No Parity(default)

Data Bit，1 Stop Bit，Even Parity:

Code: Data Bit，1 Stop Bit，Even Parity

Data Bit，1 Stop Bit，Odd Parity:

Code: Data Bit，1 Stop Bit，Odd Parity

Data Bit，2 Stop Bit，No Parity:

Code: Data Bit，2 Stop Bit，No Parity

Data Bit，2 Stop Bit，Odd Parity:

Code: Data Bit，2 Stop Bit，Odd Parity

Data Bit，2 Stop Bit，Even Parity:

Code: Data Bit，2 Stop Bit，Even Parity

GS Control Character Replace​

Do Not Replace(default):

Code: Do Not Replace(default)

Replace by Ç:

Code: Replace by Ç

Replace by |:

Code: Replace by |

Replace by ^]:

Code: Replace by ^

Replace by ]:

Code: Replace by

Replace by <GS>:

Code: Replace by <GS>

Control Character Transmission​

Do Not Transmit Control Character:

Code: Do Not Transmit Control Character

Transmit Control Character(default):

Code: Transmit Control Character(default)

Auto Scan Mode​

Disable Auto Scan Mode(default):

Code: Disable Auto Scan Mode(default)

Enable Auto Scan Mode:

Code: Enable Auto Scan Mode

Timeout between decodes, same symbol​

ms:

Code: ms

ms(default):

Code: ms(default)

s:

Code: s

s:

Code: s

Decoding Timeout​

s:

Code: s

s:

Code: s

s:

Code: s

s:

Code: s

s:

Code: s

Disable Illumination LED:

Code: Disable Illumination LED

LED with Low brightness:

Code: LED with Low brightness

Indicator LED​

Disable LED - Good Read:

Code: Disable LED - Good Read

Enable LED-Good Read(default):

Code: Enable LED-Good Read(default)

Volume​

Volume Low:

Code: Volume Low

Volume High(default):

Code: Volume High(default)

Beeper - Startup​

Disable Beeper-Startup:

Code: Disable Beeper-Startup

Enable Beeper-Startup(default):

Code: Enable Beeper-Startup(default)

Beeper-Good Read​

Disable Beeper-Good Read:

Code: Disable Beeper-Good Read

Enable Beeper-Good Read(default):

Code: Enable Beeper-Good Read(default)

Beeper Tone- Good Read​

Beeper Tone 1 (default):

Code: Beeper Tone 1 (default)

Beeper Tone 2(2.7K):

Code: Beeper Tone 2(2.7K)

Beeper Tone 3:

Code: Beeper Tone 3

Duration Long(default):

Code: Duration Long(default)

Duration Short:

Code: Duration Short

Beeper Tone- Error​

Tone Low(default):

Code: Tone Low(default)

Tone Medium:

Code: Tone Medium

Tone High:

Code: Tone High

Start Character Symbol​

No Start Character Symbol(default):

Code: No Start Character Symbol(default)

Set Start Character Symbol as STX:

Code: Set Start Character Symbol as STX

Terminating Suffix​

No Terminating Suffix:

Code: No Terminating Suffix

Set Terminating Suffix as CR:

Code: Set Terminating Suffix as CR

Set Terminating Suffix as LF:

Code: Set Terminating Suffix as LF

Set Terminating Suffix as CR and LF(default):

Code: Set Terminating Suffix as CR and LF(default)

Set Terminating Suffix as TAB:

Code: Set Terminating Suffix as TAB

Set Terminating Suffix as ETX:

Code: Set Terminating Suffix as ETX

Custom Prefix​

Enable Custom Prefix:

Code: Enable Custom Prefix

Disable Custom Prefix(default):

Code: Disable Custom Prefix(default)

Restore All Custom Prefix:

Code: Restore All Custom Prefix

Set Custom Prefix:

Code: Set Custom Prefix

Custom Suffix​

Enable Custom Suffix:

Code: Enable Custom Suffix

Disable Custom Suffix(default):

Code: Disable Custom Suffix(default)

Restore All Custom Suffix:

Code: Restore All Custom Suffix

Set Custom Suffix:

Code: Set Custom Suffix

Code ID​

Disable CODE ID(default):

Code: Disable CODE ID(default)

Enable Prefix CODE ID:

Code: Enable Prefix CODE ID

Enable Suffix CODE ID:

Code: Enable Suffix CODE ID

Set CODE ID:

Code: Set CODE ID

Restore All CODE ID:

Code: Restore All CODE ID

AIM ID​

Disable AIM ID(default):

Code: Disable AIM ID(default)

Enable Prefix AIM ID:

Code: Enable Prefix AIM ID

Enable Suffix AIM ID:

Code: Enable Suffix AIM ID

Prefix/Suffix Sequence​

Start Character+CODE ID+AIM ID+Custom Prefix (default):

Code: Start Character+CODE ID+AIM ID+Custom Prefix (default)

Start Character+Custom Prefix+CODE ID+AIM ID:

Code: Start Character+Custom Prefix+CODE ID+AIM ID

Custom Suffix+CODE ID+AIM ID+Terminating Suffix(default):

Code: Custom Suffix+CODE ID+AIM ID+Terminating Suffix(default)

CODE ID+AIM ID+Custom Suffix+Terminating Suffix:

Code: CODE ID+AIM ID+Custom Suffix+Terminating Suffix

Transmission Configuration​

Transmit Original Data(default):

Code: Transmit Original Data(default)

Only Transmit Start Field:

Code: Only Transmit Start Field

Only Transmit Center Field:

Code: Only Transmit Center Field

Only Transmit End Field:

Code: Only Transmit End Field

Set Length for Start/End Field​

Set Length for Start Field:

Code: Set Length for Start Field

Set Length for End Field:

Code: Set Length for End Field

Inverse Barcodes​

Only Decode Regular Codes(default):

Code: Only Decode Regular Codes(default)

Only Decode Inverse Codes:

Code: Only Decode Inverse Codes

Decode Both:

Code: Decode Both

Keyboard layout​

Set the scanner's keyboard layout to match the host operating system.

Show all keyboard layouts

English (United States) (default):

Code: English (United States) (default)

French (France):

Code: French (France)

Italian (Italy):

Code: Italian (Italy)

Italian 142 (Italy):

Code: Italian 142 (Italy)

German (Germany):

Code: German (Germany)

Spanish (Spain):

Code: Spanish (Spain)

Spanish (Latin America):

Code: Spanish (Latin America)

Finnish:

Code: Finnish

Japanese:

Code: Japanese

Russian (MS):

Code: Russian (MS)

Russian (typewriter):

Code: Russian (typewriter)

Arabic (101):

Code: Arabic (101)

Irish:

Code: Irish

Polish (214):

Code: Polish (214)

Polish (Programmers):

Code: Polish (Programmers)

Dutch (Netherlands):

Code: Dutch (Netherlands)

Czech (QWERTZ):

Code: Czech (QWERTZ)

Portuguese (Portugal):

Code: Portuguese (Portugal)

Portuguese (Brazil):

Code: Portuguese (Brazil)

Swedish (Sweden):

Code: Swedish (Sweden)

Turkish Q:

Code: Turkish Q

Turkish F:

Code: Turkish F

Greek (MS):

Code: Greek (MS)

French (Belgium):

Code: French (Belgium)

English (UK):

Code: English (UK)

Symbology settings​

Enable or disable individual barcode types and set their length and check-digit options.

Show all symbology settings

Enable/Disable All Symbologies​

Enable All Symbologies:

Code: Enable All Symbologies

Disable All Symbologies:

Code: Disable All Symbologies

Enable All 2D Symbologies:

Code: Enable All 2D Symbologies

Disable All 2D Symbolgoies:

Code: Disable All 2D Symbolgoies

Enable/Disable All 1D Symbologies​

Enable All 1D Symbologies:

Code: Enable All 1D Symbologies

Disable All 1D Symbolgoies:

Code: Disable All 1D Symbolgoies

Codabar​

Enable Codabar:

Code: Enable Codabar

Disable Codabar:

Code: Disable Codabar

Codabar - Start/End Character​

Do not Transmit Start/End Character(default):

Code: Do not Transmit Start/End Character(default)

Transmit Start/End Character:

Code: Transmit Start/End Character

Set Length for Codabar​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set Maximum Length (0~50digits):

Code: Set Maximum Length (0~50digits)

Code 39​

Enable Code 39:

Code: Enable Code 39

Disable Code 39:

Code: Disable Code 39

Code 39 Check Digits​

Disable Code 39 Check Digits(default):

Code: Disable Code 39 Check Digits(default)

Enable but Do Not Transmit Code 39 Check Bit:

Code: Enable but Do Not Transmit Code 39 Check Bit

Enable and Transmit Code 39 Check bit:

Code: Enable and Transmit Code 39 Check bit

Code 39 Full ASCII​

Enable Full ASCII:

Code: Enable Full ASCII

Disable Full ASCII(default):

Code: Disable Full ASCII(default)

Set Length for Code 39​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set Maximum Length (0~50digits):

Code: Set Maximum Length (0~50digits)

Code 32​

Enable Code 32:

Code: Enable Code 32

Disable Code 32:

Code: Disable Code 32

Code 32 Prefix​

Enable Code 32 Prefix:

Code: Enable Code 32 Prefix

Diable Code 32 Prefix(default):

Code: Diable Code 32 Prefix(default)

Interleaved 2 of 5(ITF25)​

Enable ITF25:

Code: Enable ITF25

Disable ITF25:

Code: Disable ITF25

Interleaved 2 of 5(ITF25)Check Digit​

Disable ITF25 Check Digit(default):

Code: Disable ITF25 Check Digit(default)

Enable but Do not Transmit ITF25 Check Digit:

Code: Enable but Do not Transmit ITF25 Check Digit

Enable and Transmit ITF25 Check Digit:

Code: Enable and Transmit ITF25 Check Digit

Set Length for Interleaved 2 of 5 (ITF5)​

Enable ITF25 with Any Length(4-24 Digits)(default):

Code: Enable ITF25 with Any Length(4-24 Digits)(default)

ITF25 6 Digits:

Code: ITF25 6 Digits

ITF25 8 Digits:

Code: ITF25 8 Digits

ITF25 10 Digits:

Code: ITF25 10 Digits

ITF25 12 Digits:

Code: ITF25 12 Digits

ITF25 14 Digits:

Code: ITF25 14 Digits

ITF25 16 Digits:

Code: ITF25 16 Digits

ITF25 18 Digits:

Code: ITF25 18 Digits

ITF25 20 Digits:

Code: ITF25 20 Digits

ITF25 22 Digits:

Code: ITF25 22 Digits

ITF25 24 Digits:

Code: ITF25 24 Digits

Set Length for Interleaved 2 of 5​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

Industrial 2 of 5/IATA​

Enable Industrial 2 of 5 /IATA:

Code: Enable Industrial 2 of 5 /IATA

Disable Industrial 2 of 5 /IATA:

Code: Disable Industrial 2 of 5 /IATA

Set Length for Industrial 2 of 5 /IATA​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

Matrix 2 of 5(4-24 Digits)​

Enable Matrix 2 of 5:

Code: Enable Matrix 2 of 5

Disable Matrix 2 of 5:

Code: Disable Matrix 2 of 5

Set Length for Matrix 2 of 5​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

Code 93​

Enable Code 93:

Code: Enable Code 93

Disable Code 93:

Code: Disable Code 93

Set Length for Code 93​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

Code 11​

Enable Code 11:

Code: Enable Code 11

Disable Code 11(default):

Code: Disable Code 11(default)

Code 11 Check Digit Transmission​

Transmit Code 11 Check Digit:

Code: Transmit Code 11 Check Digit

Do Not Transmit Code 11 check digit(default):

Code: Do Not Transmit Code 11 check digit(default)

Code 11 Check Digit​

Disable Code 11 Check Digit(default):

Code: Disable Code 11 Check Digit(default)

Code 11 1 Check Digit:

Code: Code 11 1 Check Digit

Code 11 2 Check Digits:

Code: Code 11 2 Check Digits

Set Length for Code 11​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

Code 128​

Enable Code 128:

Code: Enable Code 128

Disable Code 128:

Code: Disable Code 128

ISBT-128​

Disable ISBT 128:

Code: Disable ISBT 128

Enable ISBT 128:

Code: Enable ISBT 128

GS1-128​

Enable GS1-128:

Code: Enable GS1-128

Disable GS1-128:

Code: Disable GS1-128

Set Length for Code 128​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

UPC-A​

Enable UPC-A:

Code: Enable UPC-A

Disable UPC-A:

Code: Disable UPC-A

UPC-A Check Digit​

Transmit UPC-A Check Digits(default):

Code: Transmit UPC-A Check Digits(default)

Do not Transmit UPC-A Check Digits:

Code: Do not Transmit UPC-A Check Digits

Convert UPC-A to EAN-13​

Disable Convert UPC-A to EAN-13(default):

Code: Disable Convert UPC-A to EAN-13(default)

Enable Convert UPC-A to EAN-13:

Code: Enable Convert UPC-A to EAN-13

UPC-E​

Enable UPC-E:

Code: Enable UPC-E

Disable UPC-E:

Code: Disable UPC-E

UPC-E Check Digit​

Transmit UPC-E Check Digits(default):

Code: Transmit UPC-E Check Digits(default)

Do Not Transmit UPC-E Check Digit:

Code: Do Not Transmit UPC-E Check Digit

Convert UPC-E to UPC-A​

Disable Convert UPC-E to UPC-A(default):

Code: Disable Convert UPC-E to UPC-A(default)

Enable Convert UPC-E to UPC-A:

Code: Enable Convert UPC-E to UPC-A

EAN/JAN-8​

Enable EAN/JAN-8:

Code: Enable EAN/JAN-8

Disable EAN/JAN-8:

Code: Disable EAN/JAN-8

Convert EAN-8 to EAN-13​

Disable Convert EAN-8 to EAN-13(default):

Code: Disable Convert EAN-8 to EAN-13(default)

Enable Convert EAN-8 to EAN-13:

Code: Enable Convert EAN-8 to EAN-13

EAN/JAN-13​

Enable EAN/JAN-13:

Code: Enable EAN/JAN-13

Disable EAN/JAN-13:

Code: Disable EAN/JAN-13

UPC/EAN/JAN Supplemental​

Ignore UPC/EAN/JAN Supplemental:

Code: Ignore UPC/EAN/JAN Supplemental

Decode UPC/EAN/JAN Supplemental:

Code: Decode UPC/EAN/JAN Supplemental

Autodiscriminate UPC/EAN/JAN Supplemental:

Code: Autodiscriminate UPC/EAN/JAN Supplemental

Convert EAN13 to ISBN​

Enable Convert EAN13 to ISBN:

Code: Enable Convert EAN13 to ISBN

Disable Convert EAN13 to ISBN(default):

Code: Disable Convert EAN13 to ISBN(default)

Convert EAN13 to ISSN​

Enable Convert EAN13 to ISSN:

Code: Enable Convert EAN13 to ISSN

Disable Convert EAN13 to ISSN(default):

Code: Disable Convert EAN13 to ISSN(default)

GS1 DataBar(RSS14)​

Enable GS1 DataBar:

Code: Enable GS1 DataBar

Disable GS1 DataBar:

Code: Disable GS1 DataBar

GS1 DataBar Limited​

Enable GS1 DataBar Limited:

Code: Enable GS1 DataBar Limited

Disable GS1 DataBar Limited:

Code: Disable GS1 DataBar Limited

GS1 DataBar Expanded​

Enable GS1 DataBar Expanded:

Code: Enable GS1 DataBar Expanded

Disable GS1 DataBar Expanded:

Code: Disable GS1 DataBar Expanded

MSI​

Enable MSI:

Code: Enable MSI

Disable MSI(default):

Code: Disable MSI(default)

MSI Check Digit Transmission​

Transmit MSI Check Digit:

Code: Transmit MSI Check Digit

Do Not Transmit MSI Check Digit(default):

Code: Do Not Transmit MSI Check Digit(default)

MSI Check Digits​

MSI 1 Check Digit (default):

Code: MSI 1 Check Digit (default)

MSI 2 Check Digits:

Code: MSI 2 Check Digits

MSI 2 Check Digit Option​

MOD10/MOD10 (default):

Code: MOD10/MOD10 (default)

MOD10/MOD11:

Code: MOD10/MOD11

Set Length for MSI​

Set the Minimum Length(0~50 digits):

Code: Set the Minimum Length(0~50 digits)

Set the Maximum Length(0~50 digits):

Code: Set the Maximum Length(0~50 digits)

Febraban​

Enable Febraban(ITF25):

Code: Enable Febraban(ITF25)

Disable Febraban(ITF25)(default):

Code: Disable Febraban(ITF25)(default)

Enable/Disable Febraban(CODE128)​

Enable Febraban(CODE128):

Code: Enable Febraban(CODE128)

Disable Febraban(CODE128)(default):

Code: Disable Febraban(CODE128)(default)

Febraban Check Digit​

Enable Febraban Check Digit:

Code: Enable Febraban Check Digit

Disable Febraban Check Digit(default):

Code: Disable Febraban Check Digit(default)

PDF417​

Enable PDF417:

Code: Enable PDF417

Disable PDF417:

Code: Disable PDF417

Micro PDF417​

Enable Micro PDF417:

Code: Enable Micro PDF417

Disable Micro PDF417:

Code: Disable Micro PDF417

QR Code​

Enable QR:

Code: Enable QR

Disable QR:

Code: Disable QR

Micro QR​

Enable Micro QR:

Code: Enable Micro QR

Disable Micro QR:

Code: Disable Micro QR

Data Matrix​

Enable Data Matrix:

Code: Enable Data Matrix

Disable Data Matrix:

Code: Disable Data Matrix

Aztec Code​

Enable Aztec:

Code: Enable Aztec

Disable Aztec:

Code: Disable Aztec

Appendix: data and digit barcodes​

Used to enter values for custom prefix / suffix and code ID. Scan the relevant "set" code, then the hex-digit barcodes below, then Save.

Show data and digit barcodes

Digit / hex 0:

Code: Digit / hex 0

Digit / hex 1:

Code: Digit / hex 1

Digit / hex 2:

Code: Digit / hex 2

Digit / hex 3:

Code: Digit / hex 3

Digit / hex 4:

Code: Digit / hex 4

Digit / hex 5:

Code: Digit / hex 5

Digit / hex 6:

Code: Digit / hex 6

Digit / hex 7:

Code: Digit / hex 7

Digit / hex 8:

Code: Digit / hex 8

Digit / hex 9:

Code: Digit / hex 9

Digit / hex A:

Code: Digit / hex A

Digit / hex B:

Code: Digit / hex B

Digit / hex C:

Code: Digit / hex C

Digit / hex D:

Code: Digit / hex D

Digit / hex E:

Code: Digit / hex E

Digit / hex F:

Code: Digit / hex F

Cancel the current configuration:

Code: Cancel the current configuration

Cancel all entered digits:

Code: Cancel all entered digits

Cancel the last digit:

Code: Cancel the last digit

Save:

Code: Save

Frequently asked questions​

Can the HD630 read QR codes from phone screens?
Yes. The CMOS 2D scanning engine is designed to read barcodes and QR codes from electronic screens, including smartphones, tablets, LCD monitors and LED/OLED displays — ideal for mobile tickets, digital loyalty cards and e-coupons.
Does the HD630 require driver installation?
No. The scanner connects over USB and works as a standard HID keyboard device, so it is recognised automatically by Windows, macOS and Linux without any additional drivers or software.
What 2D codes can the HD630 read?
QR Code, Micro QR, Data Matrix, PDF417, MicroPDF417, Aztec Code, MaxiCode and Hanxin, in addition to all major 1D formats such as EAN, UPC, Code 128, Code 39 and Interleaved 2 of 5.
Can the HD630 be used over an RS232 serial port?
Yes. The scanner supports an RS232 interface with configurable baud rate, data bits, stop bits and parity — scan the codes in the RS232 sections above to match your host settings.
How do I add a custom prefix or suffix?
Scan "Enable custom prefix" (or suffix), then "Custom prefix setting", then the hex-digit barcodes from the appendix that spell the ASCII hex of the characters you want, and finally "Save". The data and digit barcodes are in the appendix at the bottom of this page.

Downloads​

Original manufacturer PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.