Skip to main content

Metal cash drawer with removable insert, RJ12 interface, SecureTill-460F

GTIN: 5906935201640 · SKU: SecureTill-460F

Table of contents​

Specifications​

  • Colour: black
  • Material: metal
  • Surface: high-quality SGCC powder-coated galvanized sheet
  • Sliding system: guide-based design
  • Number of compartments: 5 banknote compartments, 8 coin compartments
  • Banknote compartment dimensions: widths 7.6 / 7.7 / 7.7 / 7.8 / 7.5 cm × 18 cm length
  • Lock: three-position with four functions (drawer opening/closing, manual opening, electronic opening)
  • Additional functions: pull-out coin compartment, adjustable coin compartments, two slots for other means of payment
  • Interface: RJ12
  • Coil voltage: 12 V
  • Drawer life: up to 1,000,000 operating cycles
  • External dimensions: 46 (W) × 46.5 (L) × 11.5 (H) cm
  • Package dimensions: 53.5 × 54 × 16 cm
  • Product weight: 8.9 kg
  • Weight with packaging: 10 kg

Kit contents​

  • Cash drawer
  • Two keys to the lock
  • Cable with RJ12 plug

Key features​

  • Removable insert — the coin compartment pulls out and the coin dividers are adjustable, so the layout can be matched to your local currency and the insert taken away for emptying.
  • Metal housing — high-quality SGCC powder-coated galvanized sheet resists mechanical damage and tampering.
  • Generous capacity — five banknote compartments and eight coin compartments.
  • Two payment slots — two slots on the front let you drop in vouchers, cheques and other means of payment without opening the drawer.
  • Three ways to open — with the key, the emergency lever, or electronically from a fiscal printer / cash register over RJ12.
  • High durability — rated for up to 1,000,000 open cycles.

Installation​

The cash drawer is equipped with a standard 6-pin RJ12 plug for direct connection to any EPSON POS printer or Epson-compatible POS equipment. When the receipt finishes printing, the printer automatically opens the drawer.

Opening the drawer​

The drawer can be opened in three ways:

  1. With the key included in the set.
  2. Emergency opening — using the lever located underneath the device.
  3. Electronically — from the cash register, after the drawer has been connected with the RJ12 cable.
warning

To reduce the risk of damaging or breaking the key, avoid leaving it in the lock during normal operation.

Maintenance​

The drawer slides should be cleaned and lubricated periodically. The frequency depends on usage and environment, but the typical recommended interval is every three months.

  1. Using a dry, lint-free cloth, wipe off old grease and debris from the inner and outer guides. Do not use water or any liquid cleaners.
  2. With a clean applicator, apply a thin layer of lithium-based bearing grease to the inner and outer guides.
  3. Rotate the guides several times to coat the polyurethane rollers properly and distribute the lubricant evenly.

Safety​

  • The cash drawer is designed exclusively for storing money and documents related to trading activities. Do not store objects that may damage the mechanism or affect its construction.
  • The product is not waterproof. Avoid contact with water, other liquids and excessive moisture to prevent damage.
  • Place the drawer in a stable, dry location that protects it against mechanical damage and unauthorised access.
  • If you have trouble opening the drawer, do not use force — contact an authorised technical service.
  • Be careful when opening the drawer to avoid pinching your fingers.

Frequently asked questions​

How do I open the SecureTill-460F cash drawer?
The lock has to be in the open position first — when it is locked, the drawer cannot be opened and electronic pulses are ignored. With the lock open there are three methods: manually, by turning the key one more position past 'open' until the latch releases; electronically, when a fiscal printer or cash register issues the open-drawer pulse over the RJ12 cable; or in an emergency, using the lever underneath the housing.
Which cash registers and fiscal printers is the SecureTill-460F compatible with?
The drawer has a standard 6-pin RJ12 connector and a 12 V solenoid, the most common POS standard. It connects directly to any EPSON POS printer or Epson-compatible device that issues the open-drawer pulse. Some legacy devices use a different pinout — check the device specification before ordering, or contact us with the model name and we will confirm compatibility.
Will the SecureTill-460F work with a Novitus cash register?
No. The SecureTill-460F is a passive drawer — the cash register supplies the solenoid pulse. Novitus cash registers require an active drawer with its own power supply and controller, so the two designs are not compatible.
How many compartments does the SecureTill-460F have?
Five banknote compartments and eight coin compartments. The coin compartment pulls out and the coin dividers are adjustable, and there are two front slots for vouchers, cheques and other means of payment.
What should I do if the drawer does not open from the fiscal device?
First confirm the lock is in the open position — when locked, electronic pulses are ignored by design. Then check that the open-drawer command is enabled in the cash register / fiscal printer software (the command name varies by vendor) and that the RJ12 cable is firmly seated. If it still does not open, use the key to open it manually and contact support — do not force it.

Downloads​

Original manufacturer PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.