Skip to main content

Label stand / dispenser for self-adhesive roll or fan-fold labels up to 110 mm wide, HDWR OPrint-LSB

GTIN: 5906935201534 · SKU: OPrint-LSB

Table of contents​

Introduction​

The OPrint-LSB is a practical label stand for thermal printer users that prevents jams and uncontrolled shifting of labels. It takes label rolls with an inner diameter of up to 30 mm as well as fan-fold labels up to 100 × 180 mm, with a maximum label width of 110 mm. The lightweight yet sturdy ABS construction is durable and stable, and its compact size makes it easy to use in different work environments.

HDWR OPrint-LSB black label stand

Specifications​

  • Material: ABS
  • Maximum label roll inner diameter: 30 mm
  • Maximum label width: 110 mm
  • Maximum fan-fold label size: 100 × 180 mm
  • Dimensions: 19.8 × 13.2 × 15.4 cm
  • Package dimensions: 22 × 14 × 4 cm
  • Weight: 240 g
  • Weight with packaging: 280 g

Assembly​

The stand consists of a base, two side frames and a panel. Assemble it as shown in the pictures below.

Step
1. Fit the first side frame into the base.Assembly step 1: fitting the first side frame into the base
2. Fit the second side frame into the base.Assembly step 2: fitting the second side frame into the base
3. Insert the panel between the side frames.Assembly step 3: inserting the panel between the side frames

Using the stand​

Fan-fold labels​

Place the stack of fan-fold labels on the base between the side frames.

OPrint-LSB with a stack of fan-fold labels OPrint-LSB with fan-fold labels

Label roll​

Place the label roll on the stand as shown below.

OPrint-LSB with a label roll OPrint-LSB holding a label roll

Safety​

  • Place the stand on a stable surface. Put it on a flat, stable surface so that it does not tip over and damage the labels.
  • Protect it from heat and humidity. High temperatures can deform the plastic parts, and humidity can reduce the durability of the labels.
  • Avoid contact with chemicals. Solvents or detergents can damage the surface of the stand and reduce its durability.

Frequently asked questions​

What types of labels does the OPrint-LSB support?
The OPrint-LSB supports labels on rolls with a maximum inner diameter of 30 mm and fanfold labels with maximum dimensions of 100 x 180 mm. The maximum label width is 110 mm.
What material is the OPrint-LSB made of?
The stand is made of ABS plastic, which ensures a lightweight yet durable and stable construction.
What are the dimensions and weight of the OPrint-LSB?
The OPrint-LSB measures 19.8 x 13.2 x 15.4 cm and weighs 240 g (280 g with packaging). The package dimensions are 22 x 14 x 4 cm.

Downloads​

Original PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.