Skip to main content

Label stand / dispenser for self-adhesive roll or fan-fold labels up to 105 mm wide, HDWR OPrint-LSW

GTIN: 5906935201541 · SKU: OPrint-LSW

Table of contents​

Introduction​

The OPrint-LSW label stand is a practical accessory that ensures smooth and trouble-free label feeding to thermal printers. It takes label rolls with an inner diameter of up to 30 mm as well as fan-fold labels up to 105 × 187 mm, with a maximum label width of 105 mm, eliminating the risk of jams and downtime during printing. The sturdy ABS construction guarantees stability, and easy assembly means the stand is ready to use in a few moments. Its compact size makes it ideal for offices, warehouses, shops and shipping points.

HDWR OPrint-LSW grey label stand

Specifications​

  • Material: ABS
  • Maximum label roll inner diameter: 30 mm
  • Maximum label width: 105 mm
  • Maximum fan-fold label size: 105 × 187 mm
  • Dimensions: 19.8 × 13.2 × 14.9 cm
  • Package dimensions: 22 × 14 × 4 cm
  • Weight: 200 g
  • Weight with packaging: 240 g

Assembly​

The stand consists of a base, two side frames and a panel. Assemble it as shown in the pictures below.

Step
1. Fit the first side frame into the base.Assembly step 1: fitting the first side frame into the base
2. Fit the second side frame into the base.Assembly step 2: fitting the second side frame into the base
3. Insert the panel between the side frames.Assembly step 3: inserting the panel between the side frames
4. The assembled stand.The assembled OPrint-LSW stand

Using the stand​

Fan-fold labels​

Place the stack of fan-fold labels on the base between the side frames.

OPrint-LSW with fan-fold labels

Label roll​

Place the label roll on the stand as shown below.

OPrint-LSW with a label roll OPrint-LSW holding a label roll

Safety​

  • Place the stand on a stable surface. Put it on a flat, stable surface so that it does not tip over and damage the labels.
  • Protect it from heat and humidity. High temperatures can deform the plastic parts, and humidity can reduce the durability of the labels.
  • Avoid contact with chemicals. Solvents or detergents can damage the surface of the stand and reduce its durability.

Frequently asked questions​

What types of labels does the OPrint-LSW support?
The OPrint-LSW supports labels on rolls with a maximum inner diameter of 30 mm and fanfold labels with maximum dimensions of 105 x 187 mm. The maximum label width is 105 mm.
What material is the OPrint-LSW made of?
The stand is made of ABS plastic, which ensures a solid and stable construction.
What are the dimensions and weight of the OPrint-LSW?
The OPrint-LSW measures 19.8 x 13.2 x 14.9 cm and weighs 200 g (240 g with packaging). The package dimensions are 22 x 14 x 4 cm.

Downloads​

Original PDF manuals kept available as a legacy reference. Everything from them is already covered on this page — use the PDFs only if you need an offline copy.