Skip to main content

Encoded 125 kHz RFID sticker, white, HD-RCC01

GTIN: 5907614660246 · SKU: HD-RCC01

The HD-RCC01 is a white, passive 125 kHz RFID sticker made of PVC with a TK4100 chip. It is factory-encoded with a unique 10-digit identification code, which you assign to a person, item or container in your system — the sticker cannot be re-encoded. A strong 3M adhesive tape lets you attach it to almost any surface, which makes it well suited to identifying people and goods, automatic inventory and access control.

Three white HD-RCC01 RFID stickers, one showing the 3M adhesive backing

The photos show several stickers — one HD-RCC01 is a single sticker.

Table of contents​

Specifications​

  • Colour: white
  • Material: PVC
  • Finish: white gloss
  • Operating frequency: 125 kHz
  • Chip: TK4100
  • Diameter: 25 mm

Kit contents​

  • HD-RCC01 encoded 125 kHz RFID sticker — 1 pc.

Product description​

The HD-RCC01 RFID sticker is a passive tag for identifying people, goods and other objects. It is already encoded and carries a unique 10-digit identification code, which is used to assign data to the tag in your system. The tag cannot be encoded again.

The identifier can be stuck to any surface with its strong 3M adhesive tape. The tag is equipped with a TK4100 chip and communicates by radio at 125 kHz, so it works with 125 kHz RFID readers.

This type of accessory is used in warehouses for automatic inventory, in companies for time and attendance, for registering goods in retail, and as protection against entry by unauthorised persons.

How to use​

  1. Prepare an RFID reader that supports 125 kHz.
  2. Make sure the reader is properly connected to the system (USB, RS-232, Wiegand or Ethernet) and that the reading software is running.
  3. Read the sticker by holding it close to the reader's antenna. The system should return a 10-digit code.
  4. Enter the code in your IT system (WMS, time and attendance system, POS) and assign it to the given item, employee or container.

Mounting the sticker​

  • Clean and degrease the surface where you will apply the sticker — a dry, smooth surface gives the most durable adhesion.
  • Remove the protective layer from the sticker.
  • Apply the sticker and press it firmly for a few seconds.
HD-RCC01 RFID stickers held in a hand, with the 3M adhesive backing visible

Storage and durability​

  • Store the stickers in a dry place and in the original packaging until use.
  • Avoid prolonged exposure to direct sunlight and extreme temperatures.
  • If a sticker is mechanically damaged (abrasion, tearing), replace it with a new one.

Disposal​

The stickers contain electronic components — at the end of use, dispose of them in accordance with local regulations on electronic waste.

Frequently asked questions​

How many stickers does this offer include?
This offer covers a single white encoded RFID sticker, ready for immediate use.
Can the sticker be re-encoded?
No. The sticker has a unique 10-digit identification code permanently programmed at the factory and cannot be re-encoded. You assign the data for the tag in your own system.
What frequency and chip does the sticker use?
The sticker operates at 125 kHz and is equipped with the TK4100 chip, which makes it compatible with most 125 kHz RFID readers available on the market.

Downloads​

The manuals and datasheets as PDF, in case an offline copy is needed. Everything in them is also on this page.