Skip to main content

Encoded MIFARE-compatible 13.56 MHz RFID card, white, HD-RWC02

GTIN: 5907614660864 · SKU: HD-RWC02

The HD-RWC02 is a passive 13.56 MHz RFID proximity card with a chip compatible with MIFARE 1K S50, made of white, glossy PVC in the standard 86 × 54 mm size. It has a unique 10-digit code that identifies the user in the system. It works well in access control and time and attendance.

White HD-RWC02 RFID card

Table of contents​

Specifications​

  • Operating frequency: 13.56 MHz
  • Card type: encoded
  • Chip: compatible with MIFARE 1K S50
  • Material: PVC
  • Finish: glossy white
  • Card dimensions: 86 × 54 × 1 mm

Product description​

The HD-RWC02 RFID card is a passive device for identifying goods and people. It has a chip compatible with MIFARE 1K S50 and works with radio frequency technology at 13.56 MHz.

Each card has a unique 10-digit code that identifies it and lets you assign data to it in the system. The code cannot be changed — the card cannot be re-encoded with a different code. Any content can be printed on the smooth white surface of the card with a card printer, which widens the range of its uses.

HD-RWC02 RFID card at an angle

Usage​

  1. Integration with the system. Make sure the system you want to use the card with (e.g. an access control or time and attendance system) supports cards operating at 13.56 MHz.
  2. Using the card.
    • Access: to enter a protected area, hold the card close to the RFID reader. The reader automatically reads the data stored on the chip and verifies the user's access rights.
    • Identification: in identification systems the card lets you quickly confirm the user's identity, e.g. when recording working time.
    • Storing the card: to keep the card working for a long time without problems, do not expose it to extreme conditions such as high temperature, moisture or direct sunlight — they can damage the chip or the RFID antenna.

Frequently asked questions​

Is the HD-RWC02 card encoded?
Yes. Each card has a unique 10-digit code that identifies the user in the system.
Can the card's code be changed?
No. The card cannot be re-encoded with a different code.
Which readers does the card work with?
With RFID readers operating at 13.56 MHz that support cards compatible with MIFARE 1K S50.
Can the card be printed on?
Yes. The white, glossy surface of the card can be printed with any content using a card printer.
Does the card need a battery?
No. It is a passive card — it works in the field of an RFID reader and needs no power of its own.
Will the card work with a 125 kHz reader?
No. The HD-RWC02 works at 13.56 MHz and needs a reader that supports this frequency.

Downloads​

The manuals and datasheets as PDF, in case an offline copy is needed. Everything in them is also on this page.