Pocket hanging scale up to 50 kg, wagPRO-H50F
GTIN: 5906935200568 · SKU: wagPRO-H50F
Table of contents
Specifications
- Material: ABS, steel hook
- Colour: orange
- Maximum nominal load: 50 kg
- Measurement accuracy: ±5 g
- Maximum permissible load: 100% of nominal load
- Legal-for-trade verification: no
- Display: LCD 32 × 18 mm
- Display backlight: light blue
- Additional functions: unit switching
- Available weighing units: g, kg, lb, jin, oz
- Power supply: 1 × CR2032 battery
- Device dimensions: 11.5 × 6 × 2.5 cm
- Package dimensions: 14 × 8 × 4 cm
- Device weight: 300 g
- Weight with packaging: 400 g
Kit contents
- Scale with hook
- 1 × CR2032 battery
Control panel
- LCD display — 32 × 18 mm, with a light blue backlight.
- ⏻ / T — switches the scale on and off, and locks the reading.
- UNIT — switches the weighing unit.
The scale has two keys, below the display.
Using the scale
Switching on
Hold the scale upright with nothing on the hook and press ⏻ / T. The display shows 8888, and after 2–3 seconds settles at 0.00 or 0.000. The scale is then ready.
Hold it by the ring, not by the housing — see Safety.
Weighing
- Switch the scale on and wait for it to zero itself.
- Hang the load on the hook. The weight appears on the display.
- Wait until the load stops swinging. Once the reading settles it is locked and the display shows
LOCK. - Press ⏻ / T to release the reading and weigh again.
Never load the scale beyond its 50 kg capacity.
Locking the reading
Pressing ⏻ / T during weighing locks the value on the display, which is useful when the scale hangs out of easy view. Press ⏻ / T again to unlock it and take the next reading.
Switching the unit
Press UNIT to move between grams (g), kilograms (kg), pounds (lb), jin and ounces (oz).
Jin is a Chinese unit of mass equal to 500 g, still in everyday use in Asian trade.
Backlight
The backlight goes out when the scale is not being used, or when the load on the hook has been steady for more than 3 seconds. Press any key, or change the load on the hook, and it comes back on.
Switching off
Press ⏻ / T to switch the scale off.
Safety
- Hold the scale upright once it is switched on.
- Weigh by holding the ring, or by hanging the scale from it. Do not hold the housing while weighing — that skews the reading beyond tolerance and can damage the scale.
- Avoid strong shocks and vibration during use.
- The housing is ABS. Clean it with a soft cloth and water or detergent; never use aggressive substances such as benzene or solvents.
- Do not dismantle the scale yourself. If a fault occurs that is not down to mishandling, send it back to us.
Frequently asked questions
What is the maximum load and accuracy of the wagPRO-H50F?
Which weighing units does the scale support?
How many keys does the scale have?
The display shows LOCK — what does that mean?
Why should I not hold the scale by its housing?
What battery does the scale take?
Why did the backlight go out?
Is the scale suitable for trade settlements?
Files to download
The manual and the datasheet in PDF, in case you need an offline copy. Everything they contain is also on this page.